Distribution,persistence, and fate of mexacarbate in the aquatic environment of a mixed‐wood boreal forest

Abstract

The distribution and persistence of aerially applied mexacarbate were studied in a New Brunswick aquatic forest environment after spraying twice at a dosage of 70 g A.l./ha using a fixed‐wing aircraft. Average droplet density (drops/cm²) and ground deposition (g A.1./ha) between the two applications differed considerably. The values for the first and second applications were 1.7 and 0.73, and 5.2 and 2.0, respectively; but the average NMD (20 μm) and VMD (36 μm) for both applications were nearly the same. The maximum 1‐h postspray concentrations of mexacarbate in the stream and pond waters were 0.73 and 18.74 ppb, respectively. Concentrations fell rapidly to below detection limits within 12 h in stream and within 3 d in pond water. Cattails (Typha latifolia), manna grass (Glyceria borealis) and bog moss (Sphagnum sp.) collected from the pond contained peak 1‐h postspray concentrations of 720, 482 and 81 ppb, respectively. The concentration levels decreased rapidly and the average half‐lives of the chemical in them were about 3.9, 8.5 and 2.0 h. Bog moss, stream moss (Fontinalis sp.), watercress (Nasturtium officinalis), buttercup (Ranunculus aquatilis) and green alga (Drapamaldia sp.) sampled from the stream sites did not contain measurable levels of mexacarbate. Also, caged and wild tadpoles (Rana clamitans melanota) from the pond, and brook trout (Salvelinus fontinalis) (caged and wild), Atlantic salmon (Salmo salar) (wild) and mayfly nymphs (Ephemeralla sp.) collected from the stream did not contain any of the material. Mexacarbate was not detected in stream and pond sediments. The demethylated products, 4‐methylamino and 4‐amino‐3,5‐xylyl methylcarbamates and the phenol, 4‐dimethylamino‐3,5‐xylenol, were frequently detected as metabolites in water and in the aquatic plants. The presence of these compounds showed that demethylation and hydrolytic routes are the major metabolic pathways for the dissipation of mexacarbate from these substrates.     

Persistence characteristics of operationally sprayed fenitrothion in nearby unsprayed areas of a conifer forest ecosystem in New Brunswick

Abstract

Persistence characteristics of operationally sprayed fenitrothion were investigated in various substrates sampled from neighbouring unsprayed areas in New Brunswick. Air, water, sediment, aquatic plants, fish, balsam fir [Abies balsamea (L.) Mill] foliage, forest soil and litter samples were collected from random sampling locations selected within 200 m from the operational spray blocks. The same substrates were resampled from the same plots and from the same locations about a year later just prior to the commencement of the operational spraying. Control samples were collected from an unsprayed site, near Sault Ste. Marie, Ontario. All samples were analysed for fenitrothion, by gas‐liquid chromatography. Except the fish samples all the substrates collected during the time of operational spraying contained low but detectable levels of fenitrothion. When collected a year later prior to the operational spray program, only balsam fir showed any detectable levels (detection limit, 0.01 ppm) of the chemical. All other samples showed no fenitrothion residues (detection limit for air, 10 ng/m³; for water, 0.01 ppb; and for other samples, 0.01 ppm). The findings confirmed that fenitrothion does not persist for an extended period of time in the aquatic substrates. The conifer foliage, however, showed persistent residues at a level of about 0.55 ppm even after the winter months, although there was no indication of accumulation of the chemical as a result of repeated exposure. The study demonstrated that the conifer needles acted as a micro sink for the chemical which showed a tendency to persist in the leaf tissues for a considerable length of time.     

Urban green-cover and the environmental performance of Chennai city

Chennai city the capital of Tamil Nadu is located in southeastern India. Its average population growth rate is 25% per decade, which recurrently alters the city’s land-cover particularly the receding green-cover distressed the city’s self-renewal capacity, in terms of groundwater recharge, pollution sequestration and microclimatic amelioration. This has been appraised by means of a GIS model. This model was developed using three sets of green-cover associated parameters, namely air quality amelioration, hydrological process regulation and microclimatic amelioration. The outcome confirms the difference in the city’s environmental performance between the 1997 and 2001. At some parts of the city, due to the green-cover change, the extent of modification was 38%, in terms of mean percent change in all three sets of parameters mentioned earlier. Through coefficient of correlation (r) method, relationship between green-cover change and environmental performance change are checked. It confirms positive relationship (r = 1) in all parts, except at few places.     

Effect of sunlight radiation,rainfall and droplet spectra of sprays on persistence of bacillus thuringiensis deposits after application of dipel® 76af formulation onto conifers

Abstract

The effect of sunlight radiation, rainfall and droplet spectra of sprays on per ‐sistence of a Bacillus thuringiensis subspp. kurstaki (Btk) formulation, DiPel^® 76AF, was examined after application onto spruce [Picea glauca (Moench) Voss] foliage. The investigation consisted of three studies: (i) Study I: a laboratory microcosm study to examine the photostability of DiPel 76AF deposits on foliage after different periods of exposure to two radiation intensities, (ii) Study II: a laboratory microcosm study to examine the rainfastness of foliar deposits after exposure to different amounts of rainfall consisting of two separate droplet spectra, and (iii) Study III: a field microcosm study to investigate the influence of two different droplet spectra of DiPel 76AF sprays on foliar persistence of Btk under natural weathering conditions. In all studies, persistence of Btk was investigated both by bioassay [using spruce budworm (Choristoneura fumiferana Clemens)] and total protein assay.

The findings of Study I indicated that bioactivity of foliar deposits decreased with increasing duration of exposure to radiation, and with increasing radiation intensity. The half‐life (DT₅₀, the exposure period required for 50% of the initial bioactivity to disappear) was 5.1 d for the low intensity, and 3.9 d for the higher intensity. In contrast with the bioassay results, the total protein levels [determined by the bicinchoninic acid (BCA) method] showed no decrease with increasing duration of exposure, or with increasing radiation intensity.

The findings of Study II indicated that bioactivity of foliar deposits decreased with increasing cumulative rainfall. A new term, RF₅₀ [the amount of rain (in mm) required to washoff 50% of the initial deposit], was introduced to understand the relationship between rainfall intensity and reduction in bioactivity. When the same amount of rain was applied in different droplet sizes, the RF₅₀ value was high (5.2 mm) for the small rain droplets, and was low (2.9 mm) for the large rain droplets. Similar to the bioassay results, the total protein concentrations (determined by the BCA method) decreased with increasing amount of rain and with increasing rainfall intensity. The RF₅₀ value (obtained using ng protein /cm²) was 5.4 mm for the small rain droplets, and was 3.4 mm for the large rain droplets.

The field microcosm study indicated that when DiPel 76AF was applied in small droplets (D_v.5 of 65 μm), the persistence of bioactivity was ca 8.0 d, whereas when it was applied in large droplets (D_v.5 of 130 nm) it was ca 11 d. Bioactivity decreased with time after spray, and the DT₅₀ was 1.98 d for the spray of small droplets, and 2.87 d for that of large droplets. Similar to the bioactivity, the total protein concentrations also decreased with time after spray, and the DT₅₀ values for the small and large droplet spectra were 3.45 and 6.07 d respectively.     

Photostabilization of the botanical insecticide azadirachtin in the presence of lecithin as UV protectant

Abstract

The phytochemical insecticide, azadirachtin (AZ), undergoes UV‐induced photodegradation. Using the isomer AZ‐A as a standard, its photochemical stability was studied with and without adding lecithin surfactant as a UV protectant. Standard solutions of pure AZ‐A and Margosan‐O^® were prepared in methanol‐hexane with (AZ‐A:lecithin, 1:2 by weight) and without lecithin, applied separately onto glass plates and maple (Acer L.) foliage and exposed to radiant energy under controlled conditions. Noticeable photostabilization of AZ‐A was achieved in the samples containing lecithin compared to AZ‐A samples without the lecithin additive. First‐order kinetic evaluation of the data showed that the DTy₅₀ (half‐life) and C (rate constant) values for AZ‐A with and without lecithin on glass plates were 5.68 d and 0.122, and 5.42 d and 0.128, respectively. The corresponding values for the Margosan‐0 formulation were 7.37 d and 0.094, and 6.24 d and 0.111. The DT₅₀ and C values for the pure AZ‐A on maple foliage with and without lecithin were 8.77 d and 0.079, and 6.54 d and 0.106, respectively. The corresponding values for the Margosan‐0 formulation on foliage were 8.35 d and 0.083, and 7.45 d and 0.093. The kinetic data gave quantitative information regarding the photostabilization of AZ‐A in the presence of lecithin. Good UV protection can only be achieved if the additive has the matching X_max of AZ‐A. The mechanism of photostabilization of AZ‐A in the presence of lecithin was due to either energy transfer from the excited AZ‐A to lecithin and/or competitive absorption of UV photons by the latter.     

A study on the lethal toxicity of aminocarb to freshwater crayfish and its in vivo metabolism

Adult crayfish (Orconetes limosus) were exposed to 0.1, 1.0, 5.0, 10.0, 25.0, 30.0, 40.0, 50.0 and 60.0 ppm of aminocarb in water at 15 degrees C under laboratory conditions for 144 h. No apparent behavioral changes were observed in crayfish exposed to 0.1, 1.0 and 5.0 ppm of aminocarb during the experiment. Symptoms of acute toxicity were apparent at concentrations greater than or equal to 10 ppm, and mortality occurred at and above 25 ppm. The LC50, 96 h, to adult crayfish was about 33 ppm. The parent compound and its metabolites, MA (4-methylamino-m-tolyl N-methylcarbamate) and AM (4-amino-M-tolyl N-methylcarbamate), were detected in crayfish 96 h after exposure to various concentrations of aminocarb. The primary metabolite detected was MA which accounted for 75% to 95% of the body residue. The highest total residue (Aminocarb + MA + AM) was 40 ppm detected in crayfish exposed to 60 ppm of aminocarb for 96 h.     

Pulsed laser micro polishing: Surface prediction model

The objective of this work is to predict the final roughness of metal surfaces that have undergone pulsed laser micro polishing. The motivation for pulsed laser micro polishing is to reduce the surface roughness of parts whose surface texture can approach the feature size. Being able to predict the magnitude of the polishing and frequency (wavelength) content of the surface will assist in the design of optimal processing parameters with minimal experiments. Laser pulses are used to create shallow melt pools with a controlled size (e.g., depth) and duration in order to allow surface tension forces to “pull down” asperities with small radius of curvature. There is no ablation occurring in the process being modeled. The melt depth and duration are predicted with a transient, two-dimensional axisymmetric heat transfer model with temperature-dependent material properties. The surface of the melt pool is analytically modeled as oscillations of stationary capillary waves with damping resulting from the forces of surface tension and viscosity. Above a critical spatial frequency, f_cr, a significant reduction in the amplitude of the spatial Fourier components is expected. The work described in this paper extends the concept of critical frequency to a physics-based prediction methodology for predicting the spatial frequency content and surface roughness after polishing, given the features of the original surface, the material properties, and laser parameters. The proposed prediction methodology was validated using line polishing data for stainless steel 316L and area polishing results for pure nickel, Ti6Al4V, and Al-6061-T6. The predicted average surface roughnesses were within 12% of the values measured on the polished surfaces.     

Antioxidant and modulatory role of Chlorophytum borivilianum against arsenic induced testicular impairment

Arsenic has a suppressive influence on spermatogenesis and induces impairment in male reproductive system due to oxidative stress. The present study was aimed to test the arsenic induced toxicity and protection by Chlorophytum borivilianum. The effect of sodium arsenite (4 mg/(kg body weight (bw). day)) via double distilled water without or with C. borivilianum (800 mg/(kg bw. day)) was evaluated in Swiss albino mice for 30 days. The radical scavenging activity of the aqueous C. borivilianum root extract was measured using DPPH (1,1-diphenyl-2-picryl hydrayzyl) radical. Qualitative assessment of various cell types in the testis, sperm count and motility, testicular activity of lipid peroxidation (LPO), reduced glutathione (GSH), acid and alkaline phosphatase, cholesterol and serum testosterone were monitored. Arsenic treatment showed a significant increase in LPO, acid and alkaline phosphatase, cholesterol and decrease in sperm count, sperm motility, GSH and serum testosterone. Combined treatment showed significant decrease in LPO, acid and alkaline phosphatase, cholesterol and elevation in sperm count, sperm motility, GSH and serum testosterone. Testicular histopathology showed that C. borivilianum had reduced degeneration of germ cell in the seminiferous tubules and loss of sperms induced by arsenic intoxication. The results thus led us to conclude that administration of C. borivilianum root extract is found to be protective against arsenic induced toxicity.     

Evaluation of the larvicidal efficacy of extracts from three plants and their synergistic action with propoxur against larvae of the filarial vector Culex quinquefasciatus (Say)

Petroleum ether extracts of Piper longum, Curcuma aromatica, and Ocimum basilicum were tested for their larvicidal activity against Culex quinquefasciatus, a filarial vector using WHO standard procedures. Among the three plants, extract of P. longum was found to be highly effective with LC₅₀ and LC₉₀ being 0.89 and 1.49 ppm, respectively. C. aromatica also showed significant larvicidal activity with LC₅₀ and LC₉₀ being 11.41 and 17.36 ppm, respectively. The LC₅₀ and LC₉₀ for O. baslicum were 76.67 and 200.56 ppm, respectively. Propoxur, a carbamate was also studied for its larvicidal activity, which showed LC₅₀ to be 0.09 ppm and LC₉₀ to be 0.16 ppm. Synergistic studies of all three plant extracts with propoxur revealed P. longum as a more efficient synergist with synergistic factor (SF) of 4.13 for LC₅₀ value and 1.68 for LC₉₀. Both C. aromatica and O. basilicum exhibited antagonistic activity at their respective LC₉₀ values with propoxur. At 1 : 1 ratio of the phytoextracts and propoxur, P. longum and C. aromatica showed synergism whereas O. basilicum displayed additive effect. Thus, P. longum was found to be a better larvicidal and synergistic agent at all tested ratios. Evidence indicates that mixed formulations of phytoextracts with insecticides might reduce the concentration of the chemicals to be applied for vector control.     

Synthesis and medicinal properties of plant-derived vilangin

This article reports for the first time the antibacterial, antifungal, antioxidant and anticancer activities of vilangin synthesised from embelin isolated from Embelia ribes berries. E. ribes is widely used as traditional herbal medicine in India. E. ribes is used as appetiser, carminative, anthelmintic, alexiteric, laxative and alterative. This plant is also used to treat tumour, ascites, bronchitis, mental diseases, dyspnoea, heart diseases, urinary discharges, jaundice, hemicrania, and worms in wounds. Here the major compound, embelin, was isolated from the fruits of E. ribes. Vilangin was synthesised by condensation of embelin with formaldehyde in acetic acid solution. The biological activity of vilangin is unknown so far. Hence, we studied antibacterial, antifungal, antioxidant and anticancer activities of vilangin. The minimum inhibitory concentration value of vilangin was 62.5 μg/mL against Staphylococcus epidermidis and Salmonella typhimurium. The radical scavenging activity was maximum at 1,000 μg/mL. Ferric reducing antioxidant power assay of vilangin showed a twofold higher value compared to the standard. Vilangin showed 61.95 % of cytotoxic activity in vitro against A549 lung adenocarcinoma cancer cell line at a dose of 500 μg/mL with half-maximal inhibitory concentration (IC₅₀) of 400 μg/mL. Vilangin can thus be further tested as a new drug.